CML Labs

 This page contains labs that you can use with some of the documentation.


Some of the labs will require additional configuration that will be documented as needed. For example, underlay networks for VXLAN will be part of the lab setup but the "underlay" for QOS will be done already.

Some of this is on purpose some of this is nexus devices not keeping configurations when downloaded.


INTRO:

Layer 3: This lab can be used with the Layer 3 Basic Routing page.

Layer 3

Link Aggregation/Trunks

QOS:

VRF:

VPC

VPC HSRP: This is an alternate VPC with HSRP that is much larger and contains a basic network out to a provider over NAT as well. This does not have dedicated instructions, but the VPC page should be all you need.

OSPF Unnumbered

MP-BGP MPLS

VXLAN:This lab will be used with the static and underlay configs.

OSPF:

Intro BGP

Advanced BGP:

Popular posts from this blog

  This will be a follow along for studying the ENCOR and any exams that follow. As well as any misc information that relates such as python scripting etc. The first portion will be basic notes that I decided needed to be my base. This includes but isn't limited to topics such as basic network principles, the layer 2 process, SSH setup, IOS upgrades. This first section will most likely align with the CCENT. I will focus on Cisco for the time being, but I would like to get into Junos (OS?) and Aruba OS. Syntax and basic info on documentation Syntax for commands will be as follows: Any portion of the command with "example" should be an object that you can change. For example, in the line ip vrf "name" the portion "name" is a name you can give to identify this specific vrf. At times this "example" will identify an identifier you can change or an option that is needed for input, but it will always denote something that is configurable. The descrip...
Read more